SunSpec Certified Environmental Systems Engenuity’s SunSpec certified weather stations meet the needs of solar generation:
Engenuity ES-W100 – This entry-level weather station is used for monitoring solar panel energy efficiency. It has sensors that are specific for PV power generation panels and has an integrated ambient air temperature sensor. This low-cost, preassembled unit is compact and easy to install. Click here for more technical information.
Engenuity ES-W 300 – This commercial-grade weather station monitors solar plant energy efficiency. Like the 100 model, it is a low-cost, preassembled unit that is easy to install. It includes ambient air temperature, wind speed, wind direction, relative humidity, barometric pressure, and rain gauge sensors; as well as a wireless communication transceiver for remote reporting without hard wiring back to the weather station!. Click here for more technical information.
GesySense Wireless Sensors and Data Loggers
This fast and flexible system is ideal for supermarkets, convenience stores and other refrigeration applications where installing new wiring is cost prohibitive and monitoring of data is crucial. Already tested in some of the busiest commercial kitchen environments, this system measures temperatures, analog values, pulse counts and digital inputs making those values quickly available to expanding systems. Read more.
Ideally suited for commercial buildings and industrial campuses worldwide, QuickServer takes full advantage of FieldServer's proven protocol translation experience by offering a fully-configurable, lower-cost gateway solution. Users can preselect two protocol drivers to be preloaded into the QuickServer. Then users can quickly configure the unit for their application, or choose to have the unit pre-configured prior to delivery! (Additional drivers can be selected at additional costs.)
QuickServers have the ability to interface up to 250 points for common protocols, including LonWorks and BacNet. The FS-QS-1010 Series carries the BTL Mark and the FS-QS-1011 Series is LonMark Certified. Other features include DIP switch configuration capability, and COV support for faster data communication, reducing BACnet network traffic.
Easy to deploy and manage, and capable of both local and remote control, the i.LON SmartServer is the latest addition to Echelon’s i.LON family of Internet servers. It offers unparalleled flexibility: Use it as a standalone server, integrate it with legacy control systems, or integrate it with an automation network based on Echelon’s LonWorks® technology.
Whether you’re upgrading your existing network or starting from scratch, the i.LON SmartServer helps you minimize your energy use. Programmability, standalone operation, and built-in network management features make remote energy diagnostics or onsite monitoring easy and affordable.
The RIBMW24SB-LNAI is an I/O controller with one digital output, one digital input and one analog input connected via FT-10 twisted pair to a LonWorks® network. The digital output has a 20 Amp 277 Vac general purpose rated SPST relay and an HOA switch that can directly control exhaust fans, lights, pumps, etc.
The status of the load can be verified using the digital input by connecting a current sensor or other dry contact device such as a pressure, flow or level sensor or a limit switch. The analog input can be 0-5 or 0-10 Vdc or a 10K thermistor. The device operates on 24 Vac or dc.
The network gives the user the ability to control the relay (digital) output as well as read the status of both the digital and analog inputs from a remote location.
LON I/O module with 4 digital inputs, 2 relay outputs (with manual override) and 2 digital outputs. Suitable to interrogate for example switching status and to switch motors or other actors as result. For high inductive loads it is recommended to protect the relay contacts additionally by a RC element.
In a LON installation the two relay and the two digital outputs can be individually activated by the standard network variables. The digital outputs have a common root. Potential free switches or contacts are assigned to the digital input contacts 1 to 4 and contacts ground in a two pole position. The device is provided with an additional wipe function.
